DEALER BENEFITS

• Easily Add Light Control – Integrates with existing electrical infrastructures – simply replace the light switch
• Reliable Light Control – Lutron's patented Clear Connect RF Technology ensures ultra-reliable wireless communication between components
• Simplified AMX Integration - Use an intuitive web browser to add devices, create scenes, and program the system with no installed software tools

CUSTOMER BENEFITS

• Ideal For Existing or Retrofit Applications – Wireless light solution can be added to any room
• Save Energy – Dim a standard halogen or incandescent light bulb by 25% to save 20% energy; dim more, save even more and extend bulb life
• Automatic Shutdown - Turn off lights and AV equipment that were inadvertently left on
• Add Convenience and Easily Create the Right Ambiance - At the touch of a button, adjust the lights to give you the right light when you need it, where you want it

SPECIFICATIONS

POWER

• Power: 120 V 50 / 60 Hz
• Typical Power Consumption
• Dimmer / Switch: 0.2 W
• Test conditions: load is off and nightlight mode is enabled
• Remote Dimmer / Switch: 0 W
• Test conditions: load is off
• Surge Protection: To withstand surge voltages without damage or loss of operation, in accordance with IEEE C62.41-1991 Recommended Practice on Surge Voltages in Low-Voltage AC Power Circuits
• Power Failure: Power failure memory: should power be interrupted, the Clear Connect Gateway will return to its previous state when power is restored

ENVIRONMENTAL

• Operating Temperature: 32° F (0° C) to 104° F (40° C)
• Operating Humidity: 0% to 90%, non-condensing
• Indoor use only

ESD PROTECTION
To withstand electrostatic discharge without damage or memory loss, in accordance with IEC 61000-4-2

COMMUNICATIONS

• Dimmers and switches communicate with the system through Radio Frequency (RF) and must be located within 30 ft (9 m) of a repeater
• Remote dimmers / switches are not required to be within a specific range of a repeater. System devices operate on frequencies between 431.0 MHz and 437.0 MHz

INSTALLATION

• Mounting Requires a U.S. wallbox. 3 . in (89 mm) deep recommended, 2 . in (57 mm) deep minimum
• Wiring Uses conventional 3-way and 4-way wiring

CONNECTORS
1 Ethernet port, 1 coaxial power socket

CERTIFICATIONS
UL, CSA , NOM, FCC, IC, COFETEL

TRAINING AVAILABLE
Learn important installation, configuration and programming techniques in the following course(s) from AMX University:

• Getting Started with AMX Clear Connect

For schedules and registration for these and any AMX University courses, visit www.amx.com/training.